 |
 |
| 1. Remove screw & retaining cap. |
2. Rotate handle up (center click) and pull out (approximately 1/4"). |
 |
 |
| 3. Rotate handle clockwise to pull in control lug. |
4. Insert T-CORE™ into chamber until it stops. |
 |
 |
| 5. Rotate handle back counter clockwise (center click). |
6. Push in to final operating position. |
 |
|
| 7. Reinstall retaining cap and secure with Torx screw provided (not shown). |
|
